Toro Greensmaster 3150 | |
---|---|
Triplex greens mower | |
Power train | |
Power source | Air-cooled gasoline |
Engine make | Briggs & Stratton |
Engine model | Vanguard OHV V-twin |
Horse power | 18 @ 3600 RPM (04352) |
Transmision | Hydrostatic drive |
Traction drive | 3-wheeled, 2WD or 3WD (optional) |
Speeds | 1st - 3.8 mph 2nd - 8.1 mph Rev - 1.9 mph |
Steering | Rear wheel, power |
Tires | Smooth, 18x9.5-8.00 |
Fuel capacity | 7 gal |
Hydraulic oil capacity | 7.5 gal |
Cutting units | |
Reel drive | Hydraulic gear motor |
Reel diameter | 5" |
Reel width | 21" |
Reel blades | 8, 11 or 14 |
Number of reels | 3 |
Cutting width | 59" |
Reel speed | 1975 rpm |
Clip rate | 0.18" (11 blade) 0.25" (8 blade) |
Dimensions | |
Overall width | 69.75" |
Overall length | 90" |
Overall height | 48.5" |
Wheel tread | 49.5" |
Wheel base | 46.875" |
Weight | 1256 (with c/u) |
The Toro Greensmaster 3150 is a triplex greens mower used for mowing greens, tees, collars, approaches, fairways and other fine turf areas like ballfield infields or grass tennis courts. The Greensmaster 3150 is a further development of the Toro Greensmaster 3100 and Toro Greensmaster 3200, itself a refinement tracing it's roots to the original Toro Greensmaster 3. First introduced in 2002, it currently in production. While similar in configuration to the Greensmaster 3100, sharing the same engine and accepting most of the same attachments, the Greensmaster 3150 is a new design with the most notable changes being hydrostatic drive and joystick reel control.
Characteristics[]
The Greensmaster 3150 is a 3-wheeled triplex mower, powered by an air cooled Briggs & Stratton Vanguard OHV engine delivering 18 horsepower at 3600 RPM. Engine speed is governed to 2850 RPM. The traction drive system consists of a hydrostatic piston pump delivering flow to two orbital gear motors that drive the front wheels. An optional 3 wheel drive kit is available. It has two forward speeds and one reverse: 1, used for mowing; 2 used for transport; and reverse. Six inch drum mechanical drum brakes provide braking, with a foot operated parking brake.
Mowing, lift and lower functions are controlled by a joystick. The joystick initiates lowering the cutting units, with a variable orifice delaying lowing of the rear cutting unit allowing for all three cutting units to drop in line while the unit is moving. The hydraulic system rotates the reels at approximately 1975 RPM. The cutting units are raised by operating the joystick, which first shuts off the flow to the reel motors and then allows flow to raise the cutting units to the raised position.
The hydraulic system has a 7.5 gallon tank, located directly behind the operator's seat, in front of the 7.5 gallon fuel tank, and has a 10 micron cartridge oil filter. A control panel located to the left of the operator's seat has the engine speed control and choke levers, a ammeter for the 12v electrical system and an hour meter.
Cutting units[]
The fully floating cutting units are positioned in front of each of the tires, two in front, one in the rear. A carrier frame, supported by a solid roller, is connected to the cutting units by direct linkage that pulls the cutting units while carrying a grass collection basket. Individual lift cylinders raise and lower the cutting units by a lift arm that floats in a cutting unit carrier hoop.
Cutting units feature fixed 5" diameter, 21" wide reels, with 4 bolt, single point adjust (SPA) and double point adjust (DPA) bedknife adjusters. 4 bolt (04404, 04406 & 04408), SPA and DPA cutting units have macro adjust rear rollers with infinitely adjustable front rollers. 4 bolt (04480-04483) cutting units have macro adjust front rollers with infinitely adjustable rear rollers. All cutting units have adjustable front throw shields with adjustable cut-off bars. All previously produced Toro Greensmaster 3/300/3000 series cutting units, thatching reels, rollers and spikers are compatible.
Models[]
Year | Model # | Serial # range | Manuals | |||
---|---|---|---|---|---|---|
Operator | Parts | Service | Engine | |||
2002 | 04357 | 220000001-220000600 | 3328-421 | 3326-766 | 12191SL | |
2002 | 04357 | 220000601-220999999 | 3328-421 | 3328-212 | 12191SL | |
2003 | 04357 | 230000001-230000600 | 3328-421 | 3328-433 | 12191SL | |
2003 | 04357 | 230000601-230000800 | 3328-421 | 3329-559 | 12191SL | |
2003 | 04357 | 230000801-230001500 | 3350-113 | 3350-114 | 12191SL | |
2003 | 04357 | 230001501-230001700 | 3350-113 | 3329-676 | 12191SL | |
2003 | 04357 | 230001701-230999999 | 3350-113 | 3350-896 | 12191SL | |
2004 | 04357 | 240000001-240999999 | 3350-362 Rev A | 3350-374 | 12191SL | |
2005 | 04357 | 250000001-250999999 | 3352-255 | 3352-267 Rev B | 12191SL | |
2006 | 04357 | 260000001-260999999 | 3353-392 Rev C | 3353-402 Rev B | 12191SL | |
2007 | 04357 | 270000001-270999999 | 3358-284 Rev C | 3357-105 Rev C | 12191SL | |
2008 | 04357 | 280000001-280999999 | 3359-566 Rev A | 3359-578 Rev C | 12191SL | |
2009 | 04357 | 290000001-290999999 | 3361-537 Rev B | 3361-549 Rev C | 12191SL | |
2010 | 04357 | 310000001-310000365 | 3363-550 Rev A | 3363-562 Rev C | 12191SL | |
2010 | 04357 | 310000366-310999999 | 3363-550 Rev A | 3365-598 Rev B | 12191SL | |
2011 | 04357 | 311000001-311001000 | 3367-446 Rev B | 3367-458 Rev A | 12191SL | |
2011 | 04357 | 311001001-311001473 | 3367-446 Rev B | 3369-483 Rev A | 12191SL | |
2011 | 04357 | 311001474-311001559 | 3367-446 Rev B | 3370-943 Rev A | 12191SL | |
2011 | 04357 | 311001560-311999999 | 3367-446 Rev B | 3373-362 Rev A | 12191SL | |
2012 | 04358 | 312000001-312999999 | 3373-104 Rev A | 3370-706 Rev B | 12191SL | |
2013 | 04358 | 313000001-313999999 | 3377-374 Rev B | 3377-386 Rev B | 12191SL | |
2014 | 04357 | 314000001-314999999 | 12191SL |
Accessories[]
Factory[]
Model # | Accessory |
---|---|
04404 | 8 blade, 4 bolt cutting unit (heavy duty) |
04406 | 11 blade, 4 bolt cutting unit |
04408 | 8 blade, 4 bolt cutting unit |
04412 | Full front roller kit |
04414 | Swaged roller kit |
04422 | Variable speed traction kit |
04424 | Wiehle roller kit |
04426 | Aluminum weihle roller kit |
04433 | 3WD kit |
04450 | 11 blade, Single Point Adjust (SPA) cutting unit |
04451 | Quick height of cut kit |
04455 | Grooming reel |
04468 | 8 blade, Single Point Adjust (SPA) cutting unit |
04493 | Thatching reels |
Model # | Accessory |
---|---|
04494 | Spiker kit |
04495 | Tri-Roller kit |
04498 | Backlap/reel speed kit |
04618 | 8 blade DPA cutting unit |
04619 | 11 blade DPA cutting unit |
04624 | 14 blade DPA cutting unit |
28-2150 | Reel shutoff kit |
92-9656 | Backlap kit, quick connect |
94-1870 | Backlap kit, two-speed motor |
105-3848 | Light kit |
105-8258 | Roll-over protection system kit |
105-8338 | Quiet kit |
105-8339 | Oil cooler kit |
30707 | Arm rest kit |
Other resources[]